The FITEK Premium Barbell is the top of the range Olympic barbell, made from the highest quality materials and designed for peak performance. Like all of our Olympic barbells, this bar is manufactured to Olympic specifications, features thick hard chrome plating and high-precision needle bearings, and is built to be flexible, durable, and strong. Even at a glance, the superior quality is immediately noticeable when compared to other barbells, and it is the fine attention to detail that makes the FITEK Premium Barbell one of the best available.

The hard chrome plating used on this barbell is even thicker and stronger than the already highly durable hard chrome we use on all of our barbells, and the shaft features a visibly clear and shiny finish, available in reflective chrome or black. The aesthetic is visually noticeable but most importantly makes the barbell extremely resistant to impact, rust, and wear. Each barbell features 8 high-precision needle bearings manufactured with the utmost care to minimize friction and ensure the smoothest spin possible. This allows the sleeves to rotate effortlessly, reducing stress on your joints during Olympic lifts that require fast movement and gives you maximum stability and control throughout the exercise. We use copper bushings in the sleeves to make them robust enough for the barbell to be dropped from overhead with bumper plates.

The specifications are Olympic standard, with a total weight of 15kg, grip diameter of 25mm, and a total length of 2010mm. Weight plates of varying thicknesses will fit on the 50mm sleeves, allowing you to load up for heavy high-intensity sets, and we use a thin screw thread to provide extra friction, which helps to secure the plates more firmly. The 1.2mm diamond knurl is precision-cut to ensure the best grip without feeling sharp or uncomfortable.

The FITEK Premium Barbell is one of the highest quality barbells on the market. Perfect for Olympic Weightlifting, powerlifting, CrossFit, or bodybuilding, this barbell can handle the most intense workouts and is designed to give you the best performance regardless of your specific goals or training style. We use the best quality materials to create a barbell for serious athletes who want to use the best equipment available

Product Specifications

·         Hard chrome plating

·         Protective shaft finish available in reflective chrome or black

·         8 needle bearings (4 each side)

·         2 bushings (1 each side)

·         Capacity – 680.39kg (1500lb)

·         Weight – 15kg

·         Length – 2010mm

·         Grip diameter – 25mm

·         Sleeve diameter – 50mm

·         Knurling depth – 1.2mm

Caution: Please do not use Barbell Jack on Timber Platform

New design with Super Thick PU on the book provides extra protection for barbells 

Ÿ  Easy to use

Ÿ  Save energy and time on loading weights

Ÿ  Smart and lightweight design

Product Specifications

Ÿ   Made of 50mm diameter steel tube 

Ÿ   50mm*50mm*3mm gauge steel with high strength super-thick PU on the hook

Ÿ   Matt black powder coating 

Ÿ   Weight: 4KG

Ÿ   Length: 55cm

Ÿ   Width: 14cm

Ÿ   Height: 32cm

Ÿ   Foot Print: 55cm x 14cm

FITEK Powerlifting Barbell IPF Specs

FINE 1.5mm Knurling, great grip without ripping up the hands

The FITEK Powerlifting Barbell is designed explicitly for powerlifting. The shaft is rigid and strong to be able to accommodate heavyweights, making it ideal for squats, presses and deadlifts. Just like our Olympic barbells, this bar is made from high-quality steel and is coated with a hard chrome protective surface to increase the wear-resistance and durability. As the sleeves do not need to spin, they are manufactured with robust bronze bushings that keep movement to a minimum and feature a snap ring design to secure the sleeves to the bar. This allows you to remain stable throughout the entirety of every lift.

Powerlifting barbells need to be rigid, which is why the shaft is made with a thick grip diameter of 29mm. The sleeves are 50mm in diameter and 445mm in length, to allow ample space for weight plates of varying thicknesses. The bar can be loaded up to a maximum of 907.18kg (2000lb) and has a huge tensile strength of 210,000PSI, making it strong enough to handle the heaviest deadlifts.

This barbell features fine 1.5mm fine knurling to prevent the bar from slipping and provide superior grip. The centre knurl is included to stop the bar from sliding down your back during heavy squats.

Some brands use cheaper Allen bolts to hold the sleeves to the bar. These can easily be bent or broken or loosen over time. Instead, we use a substantially higher quality snap ring design to secure the sleeves, which means there is no chance of anything coming loose. Unlike Olympic barbells that are made with bearings to allow the sleeves to spin freely, the FITEK Powerlifting Barbell features stable and secure sleeves manufactured with bronze bushings, instead made to be as tough as possible.

When it comes to powerlifting, you want a rigid barbell that can handle heavyweight and high volume training. The FITEK Powerlifting Barbell is designed to give you the best performance and allow you to reach your lifting goals.

Product Specifications

ž   Hard chrome plating Sleeves

ž   Rigid Black Hard Chrome Shaft

ž   Centre Knurling

ž   Snap rings

ž   Bronze bushings

ž   Capacity – 907.18kg (2000lb) 

ž   Tensile strength – 210,000PSI

ž   Weight – 20kg

ž   Length – 2200m

ž   Grip diameter – 29mm

ž   Sleeve length – 445mm

ž   Sleeve diameter – 50mm

ž   Knurling depth – 1.5mm

IWF Specs, 10 Needle Bearing, Centre Knurling

The FITEK Premium Olympic Weightlifting Barbell is the top of the range Olympic barbell, made from the highest quality materials and designed for peak performance. Like all of our Olympic barbells, this bar is manufactured to Olympic specifications, features thick hard chrome plating and high-precision needle bearings, and is built to be flexible, durable, and strong. Even at a glance, the superior quality is immediately noticeable when compared to other barbells, and it is the fine attention to detail that makes the FITEK Premium Barbell one of the best available.

The hard chrome plating used on this barbell is even thicker and stronger than the already highly durable hard chrome we use on all of our barbells, and the shaft features a visibly clear and shiny finish, available in reflective chrome or black. The aesthetic is visually noticeable but most importantly makes the barbell extremely resistant to impact, rust, and wear. Each barbell features 8 high-precision needle bearings manufactured with the utmost care to minimize friction and ensure the smoothest spin possible. This allows the sleeves to rotate effortlessly, reducing stress on your joints during Olympic lifts that require fast movement and gives you maximum stability and control throughout the exercise. We use copper bushings in the sleeves to make them robust enough for the barbell to be dropped from overhead with bumper plates.

Each barbell has a loading capacity of 907.18kg (2000lb) and huge tensile strength of 210,000PSI, making them more than strong enough to handle the heaviest weights a person can lift. The specifications are Olympic standard, with a total weight of 20kg, grip diameter of 28mm, and a total length of 2200mm. Weight plates of varying thicknesses will fit on the 50mm sleeves, allowing you to load up for heavy high-intensity sets, and we use a thin screw thread to provide extra friction, which helps to secure the plates more firmly. The 1.2mm diamond knurl is precision-cut to ensure the best grip without feeling sharp or uncomfortable.

The FITEK Premium Barbell is one of the highest quality barbells on the market. Perfect for Olympic Weightlifting, CrossFit, or bodybuilding, this barbell can handle the most intense workouts and is designed to give you the best performance regardless of your specific goals or training style. We use the best quality materials to create a barbell for serious athletes who want to use the best equipment available.

Product Specifications

ž   Hard chrome plating

ž   Protective shaft finish available in reflective chrome or black

ž   10 needle bearings (5 on each side)

ž   IWF Specs, Olympic Weightlifting Hand Mark

ž   Centre Knurling

ž   2 bushings (1 each side)

ž   Capacity – 907.18kg (2000lb)

ž   Tensile strength – 210,000PSI

ž   Weight – 20kg

ž   Length – 2200mm

ž   Grip diameter – 28mm

ž   Sleeve diameter – 50mm

ž   Knurling depth – 1.2mm

Caution: Please do not use Barbell Jack on Timber Platform

New design with Super Thick PU on the book provides extra protection for barbells 

Ÿ  Easy to use

Ÿ  Save energy and time on loading weights

Ÿ  Smart and lightweight design

Product Specifications

Ÿ   Made of 50mm diameter steel tube 

Ÿ   50mm*50mm*3mm gauge steel with high strength super-thick PU on the hook

Ÿ   Gloss Red powder coating

Ÿ   Weight: 4KG

Ÿ   Length: 55cm

Ÿ   Width: 14cm

Ÿ   Height: 32cm

Ÿ   Foot Print: 55cm x 14cm